Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Toothy edge with Atoma 140 grit
#6
Mark.

It's mainstream stainless Santoku knife, and I didn't broke my Atoma 140 grit. And I finished it with edge trailing.

The sharpening and stropping was very simple. After Atoma 140, I stropped it with my paddle strop applied PA-70.

You can see this strop at the following video. https://youtu.be/iORw_kvsuDw

Next time, I'll add Scotch Brite pad for removing LOW Smile
Reply


Messages In This Thread
Toothy edge with Atoma 140 grit - by SHARPCO - 04-14-2019, 01:44 AM
RE: Toothy edge with Atoma 140 grit - by grepper - 04-14-2019, 02:26 PM
RE: Toothy edge with Atoma 140 grit - by SHARPCO - 04-14-2019, 06:17 PM
RE: Toothy edge with Atoma 140 grit - by grepper - 04-14-2019, 08:53 PM
RE: Toothy edge with Atoma 140 grit - by SHARPCO - 04-15-2019, 10:21 PM
RE: Toothy edge with Atoma 140 grit - by grepper - 04-15-2019, 10:30 PM
RE: Toothy edge with Atoma 140 grit - by grepper - 04-15-2019, 10:50 PM
RE: Toothy edge with Atoma 140 grit - by SHARPCO - 04-15-2019, 11:28 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)