06-10-2017, 10:22 PM
Still trying to eliminate and isolate the problem, but I'm finding that slow speed on some Trizacts are giving some inconsistency. It's really small and only noticeable with a bright light while sharpening and even harder to see under magnification. Nothing to see or feel while cutting.
Seems a little like belt chatter at the seam or a worn outer edge of the belt.
I don't think pressure or speed of the blades contacting with the belt are it. I've used old belts and brand new belts. Never had this issue on my 2"x72".
My next attempt to eliminate will be adding a shim under the spring inside the Viel.
Please share any thoughts or experiences.
Seems a little like belt chatter at the seam or a worn outer edge of the belt.
I don't think pressure or speed of the blades contacting with the belt are it. I've used old belts and brand new belts. Never had this issue on my 2"x72".
My next attempt to eliminate will be adding a shim under the spring inside the Viel.
Please share any thoughts or experiences.