Viel Variable Speed Motor Conversion - Alternative Method

[danforth]

For those reading and finding that when adapted for a belt the screws and collar get in the way, a few solutions:
Tormek knife grinding jig large knob gets in the way
-use a m6x12mm button cap screw instead, lots of clearance!
-use the small screw from the tormek square angle jig. You can order it here:
https://advanced-machinery.myshopify.com...67be&_ss=r
-you can also use a m6x12mm socket set screw (grub screw)
Collar gets in the way:
-you can use a 12mm drill stop collar. this will also allow you to pivot the knife more freely if the belly has a large curve