New platen for Kally 1SM

[grepper]

Another fine video by Mr. Brian, Samurai of the BESS Exchange.
 
You nailed it Brian concerning perfect platen/belt alignment on the Kally.  It seems every Kally is unique and each unit tracks a bit differently.  To get perfect alignment the platen must support the following adjustments:
 
Left to right
Closer/farther from the belt
Clockwise/counter clockwise rotation
Top to bottom tilt
Left/right side tilt
 
The Kally is a great sharpening machine.  While exact platen/belt alignment is not an absolute necessity, perfect setup makes any system perform better.
 
Thanks for taking the time to make a video explaining that important aspect of the Kally Brian.