03-06-2020, 02:54 AM
Mr. Grepper, thanks for your explanations. Your microscope image of the Cubitron II belt is not similar to the 3M image. Hopefully at larger magnification it would be better.
I use 60 and 80 grit Cubitron II belts (984 with weight backing) for knife blank shaping. It cuts really fast, both carbon and stainless steel. The 150 grit Cubitron II belts are not commonly offered in this country. My belt size is 2 x 60" (50 x 1500 mm).
Jan
I use 60 and 80 grit Cubitron II belts (984 with weight backing) for knife blank shaping. It cuts really fast, both carbon and stainless steel. The 150 grit Cubitron II belts are not commonly offered in this country. My belt size is 2 x 60" (50 x 1500 mm).
Jan