03-03-2020, 01:46 PM
The Blue scotchbrite is the "very fine", while the Gray is "super fine". Kingspoor seems to be using the same words (very fine and "ultra fine") to describe their blue and gray belts respectively.
I have not tried deburring with the gray belt. But I have done nearly every blade using the blue and it worked quite well.
They are both kinda nice to have for polishing things, but if you were only going to get one, I would recommend the blue.
When Grepper gets the KallyRest ready for consumer shipping, ordering, packaging, etc, it might be attractive to you. It has a nice platen in addition to it's angle guide section. I've also removed the factory platen from my kally.
Brian.
I have not tried deburring with the gray belt. But I have done nearly every blade using the blue and it worked quite well.
They are both kinda nice to have for polishing things, but if you were only going to get one, I would recommend the blue.
When Grepper gets the KallyRest ready for consumer shipping, ordering, packaging, etc, it might be attractive to you. It has a nice platen in addition to it's angle guide section. I've also removed the factory platen from my kally.
Brian.