01-01-2020, 10:15 AM
(This post was last modified: 01-01-2020, 10:18 AM by MaxtheKnife.
Edit Reason: spelling
)
(01-01-2020, 08:35 AM)blgentry Wrote: Well, I may have just wasted $15 then. If it doesn't work well, I guess I'll order the fine scotchbrite too. Unless I can get them to change my order...
Thanks for the info.
Brian.
i sharpen a lot of mower blades..........after cleaning them, i pre-sharpen using angle grinder with 40 grit wheel or 80grit depending on condition...........in the past i would always finish on kally........grass is actually broken with power and not cut so i have been told by others, so my method is now just finish the edge with the medium scotchbrite belt and done after the 40 or 80 grit wheel on angle grinder.
you can tell what kinda yard someone has the the mower blade, so i ask them if they want it sharp also...........some do, but buying a new blade off the shelf, not sharp.
fyi
.
.
<")))))<>(
.
<")))))<>(