04-18-2018, 07:20 PM
Mr. Rick Kr, I use a small vice:
https://www.micromark.com/QUICK-JAW-VISE
Gripping the knife from the handle allows adjusting the blade angle. I suspect that you are sort of limited in working distance so any type of adjustable angle vice would have to be rather flat, but by gripping the knife by the handle the vice is off to the side of the scope, and the scope may be place on a raised surface so only the blade in in the working distance of the scope.
There are many small vices available. You might want to check this out for ideas:
https://www.micromark.com/mini-hand-tool...play=table
https://www.micromark.com/QUICK-JAW-VISE
Gripping the knife from the handle allows adjusting the blade angle. I suspect that you are sort of limited in working distance so any type of adjustable angle vice would have to be rather flat, but by gripping the knife by the handle the vice is off to the side of the scope, and the scope may be place on a raised surface so only the blade in in the working distance of the scope.
There are many small vices available. You might want to check this out for ideas:
https://www.micromark.com/mini-hand-tool...play=table