11-18-2017, 03:23 PM
(This post was last modified: 11-18-2017, 03:29 PM by Rupert Lucius.)
I, have flown "hard instruments" and have asked for a "holding pattern" to get my thoughts together and review my notes, recheck the approach plate etc. Also know about fuel and no filling station or tanker.
Two SM 1's would be an excellent decision. Last week MSC offered them for 197.00$ shipped.
Free hand belt is the way to sharpen - develop a sight picture looking down into the space between the belt and blade if using a vertical belt
A fellow sharpener who mounted two belt machines on a short wall, the (belt) about 20* below the horizon, placing the belt in a horizontal plane. Keep the blade parallel with your rooms ceiling and or floor and the results will be excellent. Credit goes to Mr. B who shared this years and years ago.
For sharpening knife blades this may be the best guided machine: http://amktactical.com/AMK-75-1x30-Knife-Sharpener
Mr. Poe can stretch the base and create a 1x42" machine I like the 1x30" format less belt flutter.
Talk with Mr. Poe the designer at 937) 344 4488.
Rupert
Two SM 1's would be an excellent decision. Last week MSC offered them for 197.00$ shipped.
Free hand belt is the way to sharpen - develop a sight picture looking down into the space between the belt and blade if using a vertical belt
A fellow sharpener who mounted two belt machines on a short wall, the (belt) about 20* below the horizon, placing the belt in a horizontal plane. Keep the blade parallel with your rooms ceiling and or floor and the results will be excellent. Credit goes to Mr. B who shared this years and years ago.
For sharpening knife blades this may be the best guided machine: http://amktactical.com/AMK-75-1x30-Knife-Sharpener
Mr. Poe can stretch the base and create a 1x42" machine I like the 1x30" format less belt flutter.
Talk with Mr. Poe the designer at 937) 344 4488.
Rupert