11-16-2017, 07:47 PM
Have several blank plates from: https://www.metalsupermarkets.com/store-finder/ that may arrive tomorrow (Friday)?
As usual Ken is spot on: I am also curious to see if the same plate also works with Gen II, the Viel with the variable speed motor and the original six inch pulley. It would need to be positioned higher and more centered.
Grepper can do within minutes using CAD skills what will take me hours to create by the old do and try method.
Both drive wheels 3 3/4" and 6" can be done on one plate - no problem.
Rupert
As usual Ken is spot on: I am also curious to see if the same plate also works with Gen II, the Viel with the variable speed motor and the original six inch pulley. It would need to be positioned higher and more centered.
Grepper can do within minutes using CAD skills what will take me hours to create by the old do and try method.
Both drive wheels 3 3/4" and 6" can be done on one plate - no problem.
Rupert