10-28-2017, 09:35 PM
(This post was last modified: 10-28-2017, 09:50 PM by KnifeGrinders.)
Abrasion on a bare paper wheel should be negligible compared to leather; to try would mean running a brand new wheel with just clear wax, it never came to my mind.
The best explanation I can think of is that the fine diamonds at a high angle and RPM should be breaking off the burr; the contact is too brief to even consider polishing.
I've never been saving microscope images systematically as the sharpness tester was giving me the answers I needed; but after reading your interesting posts on this forum I will
The best explanation I can think of is that the fine diamonds at a high angle and RPM should be breaking off the burr; the contact is too brief to even consider polishing.
I've never been saving microscope images systematically as the sharpness tester was giving me the answers I needed; but after reading your interesting posts on this forum I will
http://knifeGrinders.com.au