08-23-2017, 06:34 AM
(This post was last modified: 08-23-2017, 10:41 AM by Rupert Lucius.)
Diamond rods are not the only key(s) to the burr removal kingdom.
Usually at hand are my Spyderco 204 ceramic rods medium, brown in color @ 15 microns and Spyderco 204 diamond rods @ 40 microns.
My favorite rods are DMT (red - 25 micron) cut in length to nine inches.
De burring angle in ref to edge angle should be greater - does not have to be precise - a greater angle.
Usually at hand are my Spyderco 204 ceramic rods medium, brown in color @ 15 microns and Spyderco 204 diamond rods @ 40 microns.
My favorite rods are DMT (red - 25 micron) cut in length to nine inches.
De burring angle in ref to edge angle should be greater - does not have to be precise - a greater angle.