+- The BESS Exchange is sponsored by Edge On Up (http://bessex.com/forum)
+-- Forum: BESS Forums (http://bessex.com/forum/forumdisplay.php?fid=1)
+--- Forum: Edge Sharpness Testing (http://bessex.com/forum/forumdisplay.php?fid=10)
+--- Thread: **New Record, Sharpest Knife , 4 BESS, Kknives Switzerland. (/showthread.php?tid=509)
**New Record, Sharpest Knife , 4 BESS, Kknives Switzerland. - Deadboxhero - 11-28-2019
Roman Káse from Knives Switzerland
Using Nitrobe77 at 64rc.
RE: **New Record, Sharpest Knife , 4 BESS, Kknives Switzerland. - grepper - 11-28-2019
Wow, that is sharp! I think the sharpest I've seen. If it were any sharper the edge would be two dimensional.
Can you share any details on the sharpening procedure?
RE: **New Record, Sharpest Knife , 4 BESS, Kknives Switzerland. - subwoofer - 10-19-2020
If you look at the media after the cut, it seems to have sprung up. When I first saw this result I wondered if the test media tension might be too high so skewing the actual reading. Is it really possible to get such a low reading? Even if the edge were perfect, there is geometry and the force needed to part the material.
Not to say this isn't some amazing work and an incredibly sharp edge, but could there be something else happening?