Platen Kalamazoo SM1 1x42 Platen

Platen Kalamazoo SM1 1x42 Platen - Printable Version

+- The BESS Exchange is sponsored by Edge On Up (http://bessex.com/forum)
+-- Forum: BESS Forums (http://bessex.com/forum/forumdisplay.php?fid=1)
+--- Forum: Relevant General Discussion (http://bessex.com/forum/forumdisplay.php?fid=19)
+--- Thread: Platen Kalamazoo SM1 1x42 Platen (/showthread.php?tid=415)

Pages: 1 2

Platen Kalamazoo SM1 1x42 Platen - Mark Reich - 11-20-2018

This is The Original Kalamazoo Platen Mod I've been making for over a decade. I have had no competition or suggested improvements I'm aware of. Kalamazoo Industries copied this pattern, and briefly offered them for sale. Shortly thereafter I stopped modifying their platen in favor of the much stronger design that has remained unchanged since 2010.

This is the most complete compilation of pictures, including the manner of adjust-ability that makes this a true "one size fits all" solution.

[Image: uNVcLCn.jpg]

RE: Platen Kalamazoo SM1 1x42 Platen - Ken S - 11-20-2018

Mark,

Your platen certainly fits me! It makes the Kally so much more versatile. In addition to being so functional, your workmanship is impeccable. Five stars.

Keep up the good work!

Ken

RE: Platen Kalamazoo SM1 1x42 Platen - SHARPCO - 11-20-2018

Great job Mark. Smile

RE: Platen Kalamazoo SM1 1x42 Platen - Romo - 11-21-2018

I have had one of Mark’s platens for maybe eight years. It has been a great asset for me. Thank You Mark!

Rob

RE: Platen Kalamazoo SM1 1x42 Platen - Mark Reich - 11-24-2018

Sharpen on! Smile

Thank you for the long term review, Rob. Nice to see someone with that much experience!

Thank you for being here, and hope to hear more from you. Smile

RE: Platen Kalamazoo SM1 1x42 Platen - pikal - 04-09-2020

First and foremost, my condolences to Mark’s family and friends. I never had the pleasure of talking with him directly, but have heard nothing but positive things.

I’m bumping this old thread because I’m purchasing a Kalamazoo 1SM and was hoping to track down one of Mark’s custom platens (old or new version) or something similar to this. If anyone has any leads or could point me in the right direction, that would be much appreciated. Thank you and stay safe.

RE: Platen Kalamazoo SM1 1x42 Platen - blgentry - 04-09-2020

I was briefly looking for a replacement platen for the 1SM myself. I had a hard time locating anything and the stock platen is annoying. Not only is it too big, it's also folded on one side, which makes getting to the base of a blade difficult to impossible on one side.

After looking very briefly I discovered Grepper's KallyRest. If you're not familiar, this device has a very nice platen. But it's primary purpose is to be an angle guide for sharpening. A very nice angle guide! It's probably quite a bit more expensive than just a platen, but it does a lot more. Here's an introductory video I made about the KallyRest. It only shows the platen briefly, but it's there.

If you want a more detailed look at the whole thing, including very clear views of the platen, see my video on assembling and installing the KallyRest here:

https://youtu.be/s6knRomh1Qg

Good luck in your quest.

Brian.

RE: Platen Kalamazoo SM1 1x42 Platen - AnastasiaRodriguez - 04-14-2020

A mi me parece que quedo genial

RE: Platen Kalamazoo SM1 1x42 Platen - Mike Brubacher - 04-14-2020

De hecho lo hace Anastasia y bienvenido a la BESS Exchange!

RE: Platen Kalamazoo SM1 1x42 Platen - MaxtheKnife - 05-15-2020

Kalamazoo now has a video out for this platen.

and it is for sale now.....P/N: 563042......my spare one is a bit rusty since i have never installed it on my last kally

if you order a new kally from the MSC they will install the platen if you desire

.
https://youtu.be/42dyvSQeqvo