+- The BESS Exchange is sponsored by Edge On Up (http://bessex.com/forum)
+-- Forum: BESS Forums (http://bessex.com/forum/forumdisplay.php?fid=1)
+--- Forum: Relevant General Discussion (http://bessex.com/forum/forumdisplay.php?fid=19)
+--- Thread: A Better Way (/showthread.php?tid=399)
A Better Way - EOU - 10-24-2018
Credit to SHARPCO for this one. Replacing the old plastic thumb screw on old style ATF10s with the stud and nut system used with the new ATF-10Gs is a big improvement. It reduces test media usage and makes proper tensioning a snap. Good thinking SHARPCO! Pictured below is the new stud and nut system installed on an old style ATF10.
[attachment=773]
RE: A Better Way - grepper - 10-24-2018
Good idea Mr. Sharpco. The stud/nut works better than the screw. Applying transportable parts of new to tech to old to improve it is great out of the box thinking. You must have had your thinking cap on when you came up with that idea.
